UAV SILM logoUAV SILM
Student project
Student project
STEAM project, Gustav Adolfi Gümnaasium, Tallinn

About the project

UAV SILM started as our STEAM project at Gustav Adolfi Gümnaasium. SILM Buteo is the aircraft it produced; this part of the site covers the project itself: the subjects behind it, the team, our progress and the build. The presentation is on 8 December 2026.

Physics
Hover or tap

Aerodynamics: lift and drag in XFLR5 and OpenFOAM, balance, flight dynamics, and the thrust rig's lever-arm mechanics.

Mathematics
Hover or tap

Centre-of-gravity and static-margin calculations from the 3D model, tail volume sizing, load factors in turns, and the thrust conversion formula.

Materials science
Hover or tap

Lightweight foaming LW-PLA for skins, PETG for loaded parts, trays and gaskets, carbon-fibre spars, epoxy and carbon-filament rivets.

IT
Hover or tap

ArduPilot configuration, map-based mission planning, an encrypted WireGuard link, Python on a Raspberry Pi for the thrust rig, and the 3D viewers on this site.

Civics and defence
Hover or tap

Estonian and European defence capability, and the ethics and regulation of dual-use technology.

Project management
Hover or tap

A shared task sheet with priorities and owners, budgeting, procurement and a day-by-day plan to the presentation.

Where the project stands, 17 November

SILM Buteo
Current airframe
CAD V9 with a full SolidWorks assembly; OpenFOAM and XFLR5 analysis done; all primary electronics received; nose cone printed and weighed; thrust rig built.
SILM Monedula
Next airframe, V11b
Modelled in FreeCAD, 69 print-ready parts; CFD found and fixed a pitch instability (now 13.7 % static margin); assembly guide and materials list written.
Next
To the presentation
Print and load-test the joints and hinges, thrust test, ground tests of controls and failsafe, results summary. Presentation on 8 December 2026.

Full progress report and timeline · Build and tests · SILM Monedula

Team

Team and responsibilities

We are three students at Gustav Adolfi Gümnaasium in Tallinn. Hover or tap a card for what each of us is working on; some tasks are shared.

01
Romet Salvador Lehari
Romet Lehari
Project management and flight dynamics
Hover or tap for detail
  • Planning, procurement and budget
  • XFLR5 and OpenFOAM analysis, V-tail sizing, wing structure and ribs
  • Balance and CG from the 3D model
  • Thrust test rig and motor testing
  • Top hatch, motor adapter, battery holder and body connectors
  • Print settings for LW-PLA and PETG
  • Website and reports
02
Ludvig Janisk
 
3D modelling and research
Hover or tap for detail
  • Fuselage sectioning and shelling
  • Camera mount and nose cone thread
  • Wing rods, connectors and servo compartments
  • Flight controller and Raspberry Pi mount
  • Ruddervator modelling; propeller research
03
Karl-Robin Koppel
 
Electronics
Hover or tap for detail
  • Wiring diagram and component confirmation
  • Internal component layout
  • Final electronics circuit
  • Flight-controller programming and datalink research
Resources

Tools and materials

Updated 3 November: what we are building with, what has arrived and what is still to order.

MaterialUse
LW-PLA (lightweight foaming PLA)Fuselage and wing skins; 2 × 0.4 mm walls, 3% gyroid infill
PETGLoaded parts: motor adapter slab, wing root gaskets, and the planned battery and electronics trays
Carbon-fibre tubes12 mm main spar (2 mm wall), trailing-edge rod as control-surface hinge, tail rod
Carbon-filament rivets and glueJoining overlapping printed sections
Heat-set threaded insertsServo and component mounting, in PETG parts
Epoxy resinSealing, and bonding PETG trays to the LW-PLA fuselage
ComponentModelStatus
Flight controllerMatek H743-WING V3Received
ESCHobbywing Skywalker 60A V2Received
GPS / compassMatek M10Q-5883Received
Airspeed sensorMatek ASPD-4525 with pitot tubeReceived
4G moduleWaveshare SIM7600E-H HATReceived
CameraSiyi A2 Mini, 160° single-axis gimbal, 1080pReceived
BatteryGens Ace G-Tech 7000 mAh 4S 60CReceived
MotorT-Motor AT2321 1250 KV, long shaftReceived

All received by 20 October. The Raspberry Pi Zero 2W for the optional 4G link is part of the wiring plan; its sourcing is being confirmed. There is no ExpressLRS radio link.

ItemQuantityStatus
SG90 micro servos4Order 4 Nov
Heat-set inserts and soldering-iron adapterM2 to M6 kitOrder 4 Nov
Wiringto be sizedOrder 4 Nov
PETG filament1 kgOrder 4 Nov
LW-PLA filament1 kg or moreOrder 4 Nov
Carbon tubessizes from CADOrder 4 Nov
Control-surface to servo connectors8Order 4 Nov
Battery connector / arming plug1Order 4 Nov
EquipmentUse
FDM 3D printerAirframe sections, mounts and rig parts
Raspberry Pi 3 with 16×2 LCDThrust rig computer and display
Vernier Go Direct force sensorThrust measurement
Aluminium arm, pivot and fishing lineThrust rig lever
Servo / ESC testerManual throttle during thrust tests
MultimeterBattery voltage and current during tests
Drill and soldering ironAssembly, inserts and wiring
SoftwareUse
SolidWorksCAD for the airframe and parts
XFLR5 6.61Airfoil polars, vortex-lattice analysis, stability
OpenFOAMAirframe CFD
ArduPilotFlight-controller firmware and autopilot
SILM mission planner (our own, laptop)Map-based mission planning, checks, USB upload and arming
Mission Planner / QGroundControlOne-time flight controller configuration
Python (RPLCD, godirect, RPi.GPIO)Thrust rig software
three.jsThe interactive 3D models on this website
Google Drive and SheetsShared files, task list and planning

"Fixed-Wing UAV Design: A Systems Engineering Approach" (ResearchGate)

What we took: a systems-level design process, which helped us order the stages (aerodynamics, structure, electronics, testing).

ScienceDirect article on fixed-wing UAVs

What we took: background on aerodynamic approaches and airfoil selection.

"Development of a Hand-Launched Small UAV for Ground Reconnaissance" (ResearchGate)

What we took: design principles for small hand-launched reconnaissance aircraft, the model for our launch method.

UAS Components (uascomponents.com)

What we took: a reference for component types and specifications.

IRE Journal (irejournals.com)

What we took: background on UAV applications.

Professional encrypted flight-controller literature (AES-256 link systems)

What we took: the idea of an encrypted failsafe link, which we adapted into a cheaper 4G LTE and WireGuard concept.

GitHub project "Drone-Based Reconnaissance of Military Assets"

What we took: a comparison point for software and data handling in a similar open-source project.

V-tail sizing references: Flite Test forum on tail volume coefficients, FMSG Alling "V-Leitwerke", Charles River RC "Quick V-tail sizing"

What we took: V-tail area from tail volume coefficients and the 1/cos dihedral correction, which gave our 140 / 90 mm, 35° V-tail.

XFLR5 documentation and guidelines

What we took: how to set up VLM analyses without the fuselage body, and how to estimate inertia from surface and point masses.

OpenFOAM documentation

What we took: setting up the airframe CFD cases, the force coefficients and the streamline sampling.

Mateksys H743-WING and F765-WING manuals

What we took: pinouts, UART assignments and ArduPilot battery-sensing parameters for the wiring diagram.

ArduPilot Plane documentation

What we took: flight-controller setup and waypoint mission planning.

Vernier godirect and RPLCD Python libraries

What we took: reading the force sensor and driving the LCD on the thrust rig.

three.js (MIT licence) new

What we used it for: the interactive 3D viewers on this site, served from our own domain.

Google Open Images V6/V7 (CC BY 4.0; photos CC BY 2.0) new

What we used: about 1,800 labelled photos of tractors, cars, trucks and livestock to train our ready-made recognition model. Each photo belongs to its Flickr author.

Drone pictures of cattle and sheep, Roboflow Universe new

What we used: "aerial-cattle-detection" by cattle-psyty and "counting-cattle" by arthurmessias (CC BY 4.0), and "aerial-sheep" by riis (Public Domain), to teach our recognition model what livestock look like from above.

Ultralytics YOLO11 (AGPL-3.0) new

What we used: the YOLO11n network and training tools; our model is fine-tuned from it and shared under the same licence.

ArduPilot SITL simulator and LiteRT new

What we used: flying our missions with GPS jamming in simulation, and running the recognition model on the Raspberry Pi.

Leaflet, OpenStreetMap and Esri World Imagery new

What we used: the maps in our Ground Station program (map data © OpenStreetMap contributors, imagery © Esri and its data providers).

Claude (Anthropic)

What we used it for: help organising the website content, writing the page's HTML, CSS and JavaScript including the 3D viewers, setting up and running the OpenFOAM CFD of our V4 airframe, and the centre-of-gravity, fit-check and layout calculations.

UAV SILM is an ongoing student STEAM project, not a finished aircraft. Every figure on this page (mass, endurance, cost, balance, control response) is a theoretical estimate from CFD analysis and hand calculation, not from flight-test data. The 3D models show our CAD and simulation results, not a built aircraft.

We have not held formal discussions with Kaitseliit or the Estonian Defence Forces; we present the platform as a design study and a longer-term aim toward a working, versatile aircraft.